Don't mess with Mother Nature

 

   Paul and the Cuda Beast team had hoped to be racing this weekend in the second event of  the Carolina Xtreme Pro Mods series, but officials looked at the weather forecast for the area around the Union, S.C., track and decided  to postpone the race until May 11. The decision was based on the likelihood of rain Friday night and a high temp of only 60 on Saturday. Safe conditions for the racers and track conditions conducive to good racing for the fans were the bottom line.
   I don't know if Paul will now seek out another race between now and May 11, but you can bet he's champing at  the bit to get back on the track after the Beast's first 3-second pass. I'll try to catch him at the shop for an update on his plans.

Breakthrough

        What a difference a year makes.
        Yes, it has been nearly a year since the last Cuda Beast news. To sum up the largely missing 2018, it was virtually all testing and no racing. But with so much new about the car, particularly the engine and the need to get its much greater horsepower applied to the track, devotion to testing turned out to be a wise plan that is paying dividends.
       Paul called me last week, just a few days after he and the Cuda Beast team went to Darlington Dragway for the season-opening event of the Carolina Xtreme Pro Mod series. It's a tough group, with big names such as Chris Rini, Rickie Smith, Tommy Mauney, Charles Carpenter, Jeremy Ray and Doug Winters, who would win the race. The races are 16 cars, a mix of nitrous and blowers (no screws), and a sub-4 pass is almost a requirement to make the field.
     The team's testing included taking lots of video of the car to get a close understanding of what was happening on the starting line. Paul said the video revealed that the Beast was going left right at the hit. He bounced the information off leading chassis and parts builder Tim McAmis, who suggested more rear steer (one wheel is slightly ahead of the other). On the Beast, the passenger slick was an eighth of an inch ahead of the other one. McAmis suggested another one-eighth increase, plus some other changes to get the car to launch.
      Paul made a few test runs at Darlington the day before the race, and was ready for the car to go left as he lined up for round one of qualifying on Saturday. Instead, it went dead straight, forcing Paul to pedal before finishing with a 4.02  -- the best run of the Beast's 12-year life. The previous bests were a pair of 4.07s at different races, with a different motor and a clutch instead of an automatic. Confident that they had the Beast dialed in, Paul and computer ace Keith Dockery punched in a stouter tuneup for Q2. They were rewarded with a 3.94 at 184 mph, good enough for the 12th spot in the field.

      Paul said his first sub-4 pass was straight as an arrow and fast, so fast that he ran past the finish line, hitting about 240 before he popped the chutes as the quarter mile finish line approached. In this photo, the front bodywork where a repair had been made is distorted by the high speed.

         Paul's first-round opponent would be pro mod legend Charles Carpenter, now running a Camaro instead of his famous '55 Chevy. Carpenter had also qualified at a career best of 3.77. Paul and Keith bulked up the tuning to a 3.79-3.82 range, and Paul was hoping to beat Carpenter on the line and steal a win. What the team didn't know was that the Q2 pass hurt the engine, and Paul managed only a 4.33 against Carpenter.
       From his shop last week, Paul said he was busy repairing the engine and front body work to get the Beast ready for the next Carolina Xtreme race, April 20 at Union County Dragway in Union, S.C. Now that it looks like he has a handle on the car now, Paul is expecting more out of the Beast. The new engine ran a 3.86 for its previous owner, but Paul is confident it will exceed that, particularly thanks to  the Fowler supercharger, which is delivering huge amounts of boost.
      I'll try to have a preview of the Union race. If there is any live streaming, I'll let you know. Otherwise, CXPM is on Facebook and appears to do a decent job of race coverage. The Beast team is getting help from a couple of new companies this year -- Farrow Motorsports in Chattanooga, Tenn., and Motorsports Unlimited out of Ohio. 
     
       

MoParty time

    As this is being written, Paul and the Cuda Beast team are on their way to Brainerd Motorsports Park outside Chattanooga, Tenn., to participate in the Southeast MoParty Picnic event today. Paul and the Beast will be on hand to make exhibition runs as part of the show. It's a win-win deal -- picking up a few bucks while getting to test. Looks like a great time for MoPar fans.
   This will be the third test session at BMP this year for the Beast, and the second testing weekend in a row, and the track time is starting to pay off.

Paul said the team has discovered that the rear shocks were bad, a problem that was likely cropping up before last year. The car is sporting new Penske nitrogen filled shocks, and Paul said the Beast's tire-shake gremlins appear to be gone.
    The team made two runs last Friday, getting all the way down more or less on one of them. On test one, Paul said the car basically overpowered the track prep about halfway down after a good launch. For the second run, Paul said he let his right foot be the traction controller instead of the electronic box, and slapped the throttle when the Beast started to spin the tires after another strong start. The front wheels lifted when the power came back in, the car got loose and the front lifted again after more throttle manipulating. In what was basically a shutdown run, the Beast carded a 4.60 at about 100 mph.
    Paul said he has his eye on the track's 3.92 promod record. If you can't make the MoParty event in person, BMP has a pretty good Facebook page that can offer information.

Idle this weekend

   Paul Gibbs and the Cuda Beast team had hoped to be racing this weekend just down the road at the NMCA meet at Atlanta Dragway, but Paul decided to stay home in the face of a rainy forecast. When I spoke with him Friday, he said he was expecting the race to be cancelled, but the race is trying to move ahead today despite some rain delays.
   Paul did say that he tested again last weekend at Brainerd Motorsports Park, and one test pass was encouraging -- a 4.29 after a 0.95 60-foot time and shutting off at midtrack when the car shook. Paul said that indicated the car was overpowering the track setup.
   Paul said he is looking at renting the Chattanooga track for a testing day, which would give the team total freedom to run without affecting other racing. We'll let you know if that happens.

Test hit

 
     (UPDATE, MARCH 24: RACE CANCELLED BECAUSE OF RAIN. I think Paul will try the last week of March to test, before  the Atlanta race the first weekend in April.)
    After what must have seemed like an eternity, Paul Gibbs finally got the updated Cuda Beast onto a racetrack, testing last Saturday at Brainerd Motorsports Park outside Chattanooga. In two test attempts, the pumped-up Beast succeeded in destroying its Lenco transmission. Paul said he suspects an air pocket in the transmission cooler led to the loss of a couple of quarts of trans fluid, and on to the eventual end of the Lenco.
     But when I got Paul on the phone this week, he was on his way home from Holbrook's in Chattanooga with a fresh Lenco in the truck bed. He said he expects to test again at BMP this weekend, with an eye on resetting the track's 3.92 pro mod record.
     I recommend checking the track's Facebook page, which does a fine job of covering the racing. Here's video of Paul's first test attempt last Saturday. The sound of  the new drivetrain is incredible.

Cuda Beast test

No racing this weekend

    Paul and the Cuda Beast team will delay the start of their 2018 season for another month as Paul is moving into a new house this weekend. He had hoped  to race this weekend at the NMCA meet in Bradenton, Fla. The new opener for the team will be the NMCA race in Commerce, Ga., in early April. In the meantime, Paul said he hopes to get in a test session or two at the Brainerd Motorsports Park in Chattanooga (I think that's the facility's new name).

Weather delay

    Paul Gibbs and the Cuda Beast team hoped  to be starting their 2018 season this weekend in Bradenton, Fla., but bad weather and a few loose ends related to the racing effort will keep the new-look Cuda in the garage -- but not for too much longer.

    Paul, who is a homebuilder, said the recent spate of bad weather has put his work way behind schedule, so he couldn't spare the time to race this weekend. Also, he is getting some work done on his two duallies that will move car and team to the races this year -- one to pull the trailer and the other to pull a camper that will provide sleeping quarters for the team.

   Still, the Bradenton track remains the target for the season's first race, as Paul has been invited to run the NMCA (National Muscle Car Association) promod series this year.

    The first NMCA race is scheduled for March 8-11 in Florida. That is followed with a race just down the road from Paul's shop, at Atlanta Dragway April 5-8. A likely third race would come May 17-20 at Beech Bend Raceway in Bowling Green, Ky.  Depending on how he stands in points after the early races, Paul said he might run the entire six-race NMCA series.
    There is a lot of anticipation for this season, as the Beast is packing several new upgrades that should put it in the upper tier of pro boost cars. The visual differences include Hoosier tires (actually, Paul switched for last year's abbreviated season), and a sleek new Bohr/Hammer blower hat.

  
      The new hat creates a vastly lower profile for the Beast, apparent in the top photo. As Paul put it, "The car looks two feet longer." The hat sits atop a new Fowler supercharger,

the company's  latest offering, which in turn sits atop the BAE hemi that has seen just minimal track time since it was installed.  All of those upgrades are being handled by the latest torque converter from PTC.
     The mechanical state of the Beast has never been higher. The test now will be transferring all of that potential onto the track. That should come in a few weeks.