MoParty time

    As this is being written, Paul and the Cuda Beast team are on their way to Brainerd Motorsports Park outside Chattanooga, Tenn., to participate in the Southeast MoParty Picnic event today. Paul and the Beast will be on hand to make exhibition runs as part of the show. It's a win-win deal -- picking up a few bucks while getting to test. Looks like a great time for MoPar fans.
   This will be the third test session at BMP this year for the Beast, and the second testing weekend in a row, and the track time is starting to pay off.

Paul said the team has discovered that the rear shocks were bad, a problem that was likely cropping up before last year. The car is sporting new Penske nitrogen filled shocks, and Paul said the Beast's tire-shake gremlins appear to be gone.
    The team made two runs last Friday, getting all the way down more or less on one of them. On test one, Paul said the car basically overpowered the track prep about halfway down after a good launch. For the second run, Paul said he let his right foot be the traction controller instead of the electronic box, and slapped the throttle when the Beast started to spin the tires after another strong start. The front wheels lifted when the power came back in, the car got loose and the front lifted again after more throttle manipulating. In what was basically a shutdown run, the Beast carded a 4.60 at about 100 mph.
    Paul said he has his eye on the track's 3.92 promod record. If you can't make the MoParty event in person, BMP has a pretty good Facebook page that can offer information.

Idle this weekend

   Paul Gibbs and the Cuda Beast team had hoped to be racing this weekend just down the road at the NMCA meet at Atlanta Dragway, but Paul decided to stay home in the face of a rainy forecast. When I spoke with him Friday, he said he was expecting the race to be cancelled, but the race is trying to move ahead today despite some rain delays.
   Paul did say that he tested again last weekend at Brainerd Motorsports Park, and one test pass was encouraging -- a 4.29 after a 0.95 60-foot time and shutting off at midtrack when the car shook. Paul said that indicated the car was overpowering the track setup.
   Paul said he is looking at renting the Chattanooga track for a testing day, which would give the team total freedom to run without affecting other racing. We'll let you know if that happens.

Test hit

 
     (UPDATE, MARCH 24: RACE CANCELLED BECAUSE OF RAIN. I think Paul will try the last week of March to test, before  the Atlanta race the first weekend in April.)
    After what must have seemed like an eternity, Paul Gibbs finally got the updated Cuda Beast onto a racetrack, testing last Saturday at Brainerd Motorsports Park outside Chattanooga. In two test attempts, the pumped-up Beast succeeded in destroying its Lenco transmission. Paul said he suspects an air pocket in the transmission cooler led to the loss of a couple of quarts of trans fluid, and on to the eventual end of the Lenco.
     But when I got Paul on the phone this week, he was on his way home from Holbrook's in Chattanooga with a fresh Lenco in the truck bed. He said he expects to test again at BMP this weekend, with an eye on resetting the track's 3.92 pro mod record.
     I recommend checking the track's Facebook page, which does a fine job of covering the racing. Here's video of Paul's first test attempt last Saturday. The sound of  the new drivetrain is incredible.

Cuda Beast test

No racing this weekend

    Paul and the Cuda Beast team will delay the start of their 2018 season for another month as Paul is moving into a new house this weekend. He had hoped  to race this weekend at the NMCA meet in Bradenton, Fla. The new opener for the team will be the NMCA race in Commerce, Ga., in early April. In the meantime, Paul said he hopes to get in a test session or two at the Brainerd Motorsports Park in Chattanooga (I think that's the facility's new name).

'17 Wrap, '18 Preview: Fowler Play

        It would be gross understatement to say that 2017 was difficult for Paul Gibbs and the Cuda Beast team. Paul's mother died early in the year, and then Paul was involved in a serious traffic accident that put him in the hospital. Any thoughts of racing went to the back burner quickly.
       After a lengthy recuperation, Paul got the Beast out in July for a race at Chattanooga, but did not make the field. In August the Beast went to Steele, Ala. (above), and again did not qualify, but there Paul sensed that something was not right with the new engine. Back home, he started going through the engine and found bad valve springs. Fortunately, there was no damage and all the cylinders checked out at 100 percent.
      But when Paul cranked the car, it wouldn't idle, reaction to the throttle was slow, and then it just didn't sound healthy. Back into the engine, Paul found oil in some of the cylinders. He hooked up the computer to get some fuel usage data and cranked the engine a few more times. The data indicated that there was no fuel boost -- in fact, the car was idling with negative boost, which got worse as the RPMs went up.
      The next day, after a night of poring over the engine data, Paul removed the blower belt and started to turn the blower pulley by hand. He said that if all is good inside the blower, the pulley is hard to turn. This time, it turned easily with one hand. That indicated serious problems inside the case, which Paul subsequently found. It's a lot of technical stuff, but is basically this: A real important gear inside had all of its teeth sheared off. Hence, no boost.
     When he learned that it would take four months to get a replacement part, Paul changed course and bought the latest Roots-style blower from Fowler Engines of Columbus, Ohio. Fowler has long been respected for the performance of its superchargers, and Paul is excited by the change. It's a win-win in every respect -- more boost, less weight, etc.  In fact, Paul said the Beast should be lighter, as the new engine weighs less than the old one. The injector hat will also be new, which means I might have to change the picture of the car on the website masthead.
       So, when will this new combination hit the track? How about this month?

     Plans are to make this race at Bradenton, Fla. Right now, it's in the 40s, 50s and 60s, down there, so we hope the "Outlaw Winter Warmup" will truly live up to its name. I'll be back closer to race day with another post.
    
      

Racing, at last

    The Cuda Beast's 2017 racing season is one that stopped before it could get started, as Paul Gibbs was involved in a serious traffic accident in the spring that hospitalized him with broken bones and a punctured lung. Doctors said a full recovery would take four months; it has been three, and Paul said this week he's feeling pretty good and is back working full time.
    This Saturday, there is racing 90 minutes away, up the road at Brainerd Motorsports Park, and Paul is ready to get back on the track for the first time in about nine months. Formerly known as Brainerd Optimist Drag Strip, BMP is sort of the home track for Paul, and the track where Paul tried to establish a promod series in 2014. The effort got off to a late start, which led to problems getting enough sponsors to ensure good payouts, and the track management situation was less than ideal. The circumstances were tough, and series ran one time while Paul was healing from a broken back after a fall from a ladder. The racers put on a good show despite horrible track conditions, and the winner went about 4.20 to take the race.
    Paul said BMP is looking at having several promod races, and this one should be good as the track has seen multiple improvements since 2014 under new management, and the payout is the customary purse for a quick 8.  The only bad part will be the scorching mid-July heat, tough on the racing crews and spectators, and tough to race in. Paul said he's planning on getting to the track Friday night to make a couple of test runs -- good strategy since car and driver have been idle since October. Paul has had a new engine in the Beast that has run in the 3s, but the new drivetrain has just one pass on it.
   I have to admit that I don't know anything about this season's racing -- who's been doing what -- since the promodifieds.us website ceased operation at the end of last year. I don't know who might show up; the race flier features Bil Clanton, and Paul said Tim Segars is another big name that is looking to be there. I'm hoping that the BMP Facebook page will have some results.   The Beast team mainstays will be on hand, including Keith Dockery, who has been fighting serious medical problems for a couple of years.
  

2017 season: Let's test

       Paul and the Cuda Beast team had this weekend circled on their calendar as the start of their 2017 season with the PDRA series opener at South Georgia Motorsports Park. However, a lot of wet weather has put Paul's home construction work behind schedule, so he stayed home to try to get caught up. (The PDRA race is nuts -- 3.68 to 3.88 for the 16 Pro Boost qualifiers).
      When I called Paul Thursday, he was on a roof, but did say a test session is in the offing, in north Georgia at what he considers his home track -- Brainerd Optimist Drag Strip, now known as Brainerd Motorsports Park. It's the track where Paul tried to establish a promod series in 2014. The effort got off to a late start, which led to problems getting enough sponsors to ensure good payouts, and the track management situation was less than ideal. The circumstances were tough, and series ran one time while Paul was healing from a broken back after a fall from a ladder.
    Since then, apparently, things have changed at the track, just over the state line from Chattanooga, Tenn., and for the better, if online comments are any indication. It looks like racers are running the place now and are making improvements.
    The main improvement, Paul told me in our 45-second conversation, is the switch to concrete walls (top photo) after nearly 50 years of relying on guardrails (and not even that in the track's earliest days). Racers hate guardrails, which can impale a car or send it flying during a crash. The walls are a huge (and expensive) safety upgrade.
    The test session could come as early as next weekend. The Beast's new motor got one full run on it last yea at a PDRA race in Virginia, a multiple-pedal job that hinted at good things to come. Paul had traction problems early on, but stayed on the throttle all the way to get some engine data. The ET was 4.28 at nearly 170 miles per hour. With all of the pedaling, Paul said the speed with the old engine would have been a good 10 mph less.
    We'll report any testing news. This year's racing will be strange without the coverage by the late, lamented promodifieds.us site. Paul said he hopes to run a lot of PDRA events, which is good because they are usually streamed live and covered in detail at dragracecentral.com.
    Here are more pictures of Brainerd -- the guardrails coming down, a panorama from a big race last year (what a crowd!), and a shot I took around 1970.